RM1800H

Rugged two piece roto moulded polyethylene 
•
 Powerful 1.3 Hp stage vacuum motor provides 100" waterlift and 106 CFM of airflow
•
 Features a 400 PSI ( 800 PSI factory rating ) piston pump providing 1.0 gpm of flow
•
 Chemical is applied at low pressure through the gun and then rinsed off at high pressure with both processes controlled at the gun not requiring the operator to return to the machine
•
 Powerful blower with a 4 - 1 stretch hose which expands to over 30 feet
•
 Extensive hose wrap system for solution hose, vac hose and blower hose allows everything to be stored onboard without clutter
• All the tools required for the job including the chemical are stored onboard
• DEMA metering tip controlled chemical feed system ensuring correct dilution
• Large drain hose preventing clogging when draining
• Unit comes complete with a laminated user guide
• The large 18 gallon tanks enable it to tackle even the largest restrooms
• Lightweight and easy to transport with the upper and lower tanks detaching into two separate units 
• User benefits include labour savings, improved cleaning results versus manual systems , redcued water consumption and the advantage of higher pressure cleaning
 
 
 
 
Vac Motor 1.3 Hp = 1000W - 2 stages
Airflow 106 CFM
Waterlift 100"
Pump Rating 800 PSI (MAX)
Pump Pressure (set at factory ) 400 PSI
Pump Type Piston
Flow Rate 1 gal / minute
Weight 120 lbs
Power Cord 42 ft
Pressure Hose 50 ft
Vac Hose 33 ft
Blower Hose 33ft (extendable type)
Capacity - Solution 18 gallon
Capacity - Recovery 18 gallon